Ways to fix Plex Remote Access not Available outside Your Network:
It can be considered that the remote access feature of Plex Media Server is generally very easy to install. However, if you’re experiencing difficulties watching your movies from a distance, we will assist you.
If you are solely using Plex Media Server to view the content on your local area network (for instance, streaming your favourite shows to your HDTV or smartphone), you may not have considered the advantages of remote monitoring.
What is Plex?
A service provider media player application with ancillary programs that operates on a range of desktop platforms, including Windows, Linux, and macOS is plex. It will organise and download movies, TV shows, music web shows, podcasts, and other content to your preferred displays.
However, one of the best features of the Plex Media Server platform is the convenience with which you can manage your media from any place. You can stream your favourite movies and shows on your mobile device while being held in a waiting room, on your laptop while on holiday, or even on a smart TV at a friend’s place if remote access is allowed and correctly installed.
In this article, we’ll go over all of the reasons why the whole issue arises and what can be done to fix it.
Some of the causes the issue of Plex remote access “not available outside your network.”
Outdated/old Plex Version:
Plex Media Server introduces updates on a regular basis to resolve issues and add new functionality to the programme. In certain instances, your Plex programme can be expired, and you should upgrade it so that the functionality works properly.
A lot of users’ approach to remind of the ‘buffering’ issue. This happens when your internet connection is either very weak or has a lot of interruption. To address this problem, you will need to examine the network.
The times when your Firewall prohibits Plex Media Server from communicating with each other. This type of behaviour is usually caused by the ‘advanced’ firewalls. Advanced firewalls are used by certain people to shield their computers from outside attacks/activities that might cause harm. These firewalls can also restrict connections to Plex servers, preventing Plex Remote Access from functioning.
If you’re using a third-party firewall, try to briefly disable it. After which you need to restart your device and open Plex to see if the issue has been resolved or not.
The role of handling all network requests coming through your public IP against all internal IPs is managed by NAT (Network address translation). There have been occasions when a “double” NAT emerges, creating plenty of problems and stopping Plex Remote
Ways fix Plex remote access “not available outside your network.”
Update Plex to the latest version:
There have been several occasions where multiple bugs have been introduced into the Plex programme, causing it to fail to function as required. Every now and then, software everywhere receives updates, and some of these updates are incompatible with Plex. As a result, the engineering team have released an update that is based purely on this issue. So why wait, go and get started with the new update!
Opt for a power cycling
Plex is a programme that uses a lot of different parameters around the same time. If any of them becomes corrupted or corrupted, you will face issues while using the software.
Both the server and the target device will benefit from a power cycle. All you have to do now is switch them off and unplug their power cables. Now, for a minimum 4 seconds, press the power button to remove the remaining power. Wait approximately 2 minutes before reconnecting the power cable and turning on your devices.
After that, reopen Plex to see if the Plex remote access “not available outside your network” still exist.
There lies a dual process to set up the Plex server: either use the ‘automatic’ configuration process, where Plex implements it for you after you enable a few choices, or manually update all the values and parameters.
We’ll start with the automatic configuration because the manual configuration is a little repetitive. uPnP or NAT-PMP should be auto-configured on your network. Plex can use these parameters to automatically configure a forwarded port on the network without you having to do something else.
- To determine whether it is enabled or not, use the steps outlined below-
- In the address field of your application, type in the IP address of your router (it looks something like 192.168.8.1).
- Go to your router’s configuration now (Note: each router can have a different kind of settings button).
- Now check for uPnP or NAT-PMP as options. Check to see if any of these are turned on.
- If they’re already turned on, turn them off, save your modifications, and then turn them back on.
- Save your updates and then leave. Restart your device and see if the problem has been fixed or not.
It is likely that such an error of Plex remote access “not available outside your network” appears when the internet connection is weak. Since a slow connection impacts the requesting device and causes loading, you should make sure that the connectivity is stable and quick. The following steps will guide to solve it-
- By typing fast.com into your browser, you can check the internet speed and stability.
- Consider upgrading your link if it is below 3.5 Mbps.
- By turning off your router and restart it.
- Wait at least 40 seconds before plugging in the power cord.
Plex remote access errors can show up due to a variety of factors. A user can easily correct/fix it by making sure that he/she is running the most recent version and that the internet connection is secure. Only in rare cases if it doesn’t work, make a few quick changes to get your media server back up and running.